Description
It contains a precise blend of potassium hydroxide and sodium bicarbonate that helps restore pH balance, keeping your water clear and safe. Regular use of ClearPool’s pH Plus can help prevent costly repairs and save time spent on maintenance.
This pool chemical is available in convenient bulk orders or one-time purchases with delivery options available. We also offer an automatic replenishment service, so you never have to worry about running out at an inconvenient time. Our customer service staff are knowledgeable professionals who are always on hand to answer any questions or provide advice if needed.
With our range of pool chemicals from chlorine tablets to shock cleaners, algaecides, pH adjusters and more – it’s easy to keep your swimming pool water balanced all year round! Maintaining crystal-clear water has never been easier with us on your side!
ClearPool pH Plus
pH PLUS is used to increase the pH balance of the pool water; the correct pH balance is critical to ensure bather comfort and minimize damage to the pool fabric. The correct pH balance for Swimming Pool water is 7.4 – 7.6.
Precautions
• Always ensure bathers are out of the water when adding chemicals.
• Never mix with other chemicals, including cleaning products, weed killers and chlorine products, as a dangerous reaction may occur.
• Always handle products in a well-ventilated area.
• Always wash hands thoroughly after handling chemicals.
• Store in a cool, dry, well-ventilated, secure place. Ensure chemicals do not become damp in storage.
• Instructions and dosages given are a guide to the most effective use.
WARNING
• This container must not be used or contaminated with any other materials.
Instructions
1. Ensure bathers are out of the water when adding chemicals.
2. Use a test kit to determine the pH reading; the ideal reading is 7.4 – 7.6; if the reading is below 7.4, use pH Plus to increase the reading.
3. To increase the pH, dose at 30g per 3000 litres of water.
4. If the Swimming Pool Water is up to temperature (above 21oC), add the pH Plus directly to the water with circulation on. If the water is cold, then pre-dissolve pH Plus in a
clean a container filled with warm water and then distribute it around its surface.
5. Re-test the water after 30 minutes; if the pH still needs to be increased, follow steps 3 and 4 again.
6. Only add Pool pH Plus in stages and always retest after additions.
